Supplier-provided equipment technology
TRU-BEV Cable and Chain Conveying Systems
Enclosed conveying configurations for granular and powder materials across horizontal, vertical, and three-dimensional routes.
Application statement
Route powders and granular materials through constrained layouts.
Material characteristics, bulk density, fragility, required capacity, route geometry, discharge points, and operating conditions guide the configuration.
Designed for low material residue
Flexible three-dimensional routing
Multiple discharge-point capability
Supplier-stated low noise and maintenance
No metal-on-metal friction as supplier-described
Configuration choice
Cable versus chain arrangements.
Neither configuration is universally preferable. Selection depends on capacity, route, material behavior, control of breakage, and project interfaces.
Cable configuration · L models
Compact-duty routing
Supplier-listed models cover approximately 1-12 m³/h, with maximum listed conveying height of 20 m and horizontal distance of 40 m.
Chain configuration · R models
Higher-capacity routing
Supplier-listed models cover approximately 1-50 m³/h, with maximum listed conveying height of 30 m and horizontal distance of 60 m.
Supplier-identified considerations
The brochure compares cable/chain conveying with selected pneumatic, bucket, scraper, belt, and screw systems. ValFlow does not present those comparisons as universal performance claims; project selection requires application-specific review.
Supplier model data
Cable conveyor models
Capacity, route, and power values are supplier-provided and remain subject to engineering confirmation.
| Model | Capacity m³/h | Max height m | Max horizontal m | Power kW |
|---|---|---|---|---|
| TBGL-80L | 1-2.2 | 20 | 40 | 1.5-4 |
| TBGL-100L | 1.5-5.5 | 20 | 40 | 1.5-5.5 |
| TBGL-125L | 2.5-8.5 | 20 | 40 | 2.2-5.5 |
| TBGL-150L | 3.5-12 | 20 | 40 | 2.2-7.5 |
TBGL-80L1-2.2 m³/h
- Maximum height
- 20 m
- Maximum horizontal
- 40 m
- Power
- 1.5-4 kW
TBGL-100L1.5-5.5 m³/h
- Maximum height
- 20 m
- Maximum horizontal
- 40 m
- Power
- 1.5-5.5 kW
TBGL-125L2.5-8.5 m³/h
- Maximum height
- 20 m
- Maximum horizontal
- 40 m
- Power
- 2.2-5.5 kW
TBGL-150L3.5-12 m³/h
- Maximum height
- 20 m
- Maximum horizontal
- 40 m
- Power
- 2.2-7.5 kW
Supplier model data
Chain conveyor models
| Model | Capacity m³/h | Max height m | Max horizontal m | Power kW |
|---|---|---|---|---|
| TBGL-80R | 1-2.2 | 30 | 60 | 2.2-5.5 |
| TBGL-100R | 1.5-5.5 | 30 | 60 | 4-7.5 |
| TBGL-125R | 2.5-8.5 | 30 | 60 | 5.5-11 |
| TBGL-150R | 3.5-12 | 30 | 60 | 5.5-15 |
| TBGL-200R | 7-23 | 30 | 60 | 7.5-22 |
| TBGL-250R | 11-36 | 30 | 60 | 15-30 |
| TBGL-300R | 16-50 | 30 | 60 | 18.5-45 |
TBGL-80R1-2.2 m³/h
- Maximum height
- 30 m
- Maximum horizontal
- 60 m
- Power
- 2.2-5.5 kW
TBGL-100R1.5-5.5 m³/h
- Maximum height
- 30 m
- Maximum horizontal
- 60 m
- Power
- 4-7.5 kW
TBGL-125R2.5-8.5 m³/h
- Maximum height
- 30 m
- Maximum horizontal
- 60 m
- Power
- 5.5-11 kW
TBGL-150R3.5-12 m³/h
- Maximum height
- 30 m
- Maximum horizontal
- 60 m
- Power
- 5.5-15 kW
TBGL-200R7-23 m³/h
- Maximum height
- 30 m
- Maximum horizontal
- 60 m
- Power
- 7.5-22 kW
TBGL-250R11-36 m³/h
- Maximum height
- 30 m
- Maximum horizontal
- 60 m
- Power
- 15-30 kW
TBGL-300R16-50 m³/h
- Maximum height
- 30 m
- Maximum horizontal
- 60 m
- Power
- 18.5-45 kW
Supplier-listed capacities are theoretical values at approximately 70% fill and maximum linear speed of 0.3 m/s. Lower fill rates may be recommended for fragile materials; the supplier specifically recommends approximately 60% fill where greater breakage control is required.
Application review
Tell us about your material, capacity, route, and discharge points.
The inquiry form can capture bulk density, horizontal distance, vertical lift, bends, discharge points, available power, and project location without making every field mandatory.
Start a Conveyor Inquiry